During the operation of the automobile mold machine, the following points should be noted:
1. Ensure safe grounding and follow safety regulations for wiring and installation. Before use, check whether all components are intact and undamaged.
2. Familiar with the operation manual of the machine, understand the structure, performance, and maintenance requirements of the equipment. At the same time, pay attention to keeping the device in working condition. 3. Do not overload or work with illness. Reasonably set parameters to avoid damage to the machine tool. 4. Pay attention to daily lubrication and maintenance, and regularly replace worn parts. 5. When working, please close the protective cover to prevent fingers from accidentally touching the switch. When the workpiece rubs against the guide rail and makes a warning sound, immediately stop the machine for inspection and handling. These basic precautions can help protect the equipment and improve work efficiency. These steps are not only applicable to specific model requirements, but also general recommendations that should be adjusted and optimized according to the specific production environment and conditions during implementation.. 6. If any abnormal situation is found during work, it should be dealt with in a timely manner. Non personnel are strictly prohibited from turning on the main power and emergency stop button for inspection and maintenance work; It should be used under the guidance of an electrician. Ensure safe production while complying with various rules and regulations. 7. Clean up the site promptly after completion and turn off the corresponding control cabinet circuit according to the prescribed procedures to reduce mechanical wear and prolong the service life! 8. Strengthen learning and constantly update knowledge: With the advancement of technology, the emergence of new processes, materials, and technologies also requires us to strengthen learning and familiarize ourselves with their application methods to adapt to new work environments and demands! The above information is for reference only. Different brands and types of CNC lathes may have different details that need to be noted and analyzed on a case by case basis!. I hope the above answer is helpful to you