Common faults of side hole machines include:
1. Insufficient air pressure, check if the air source is sufficient and keep it unobstructed. If there is a lack of gas, it should be replenished in a timely manner; Loose or damaged trachea should be replaced and repaired in a timely manner. 2. During the operation, if there is no display on the console or the motor is out of power, the first step is to confirm that the power supply is connected normally, and then observe whether the LCD screen is damaged, in order to identify which part of the problem occurred and deal with it in a timely manner. 3. High body temperature is also a common problem, which may be caused by local blockage and overheating of the body. At this time, work should be stopped to strengthen ventilation and cooling. 4. It is also possible for the host to park incorrectly or collide with a wall, At this point, it is necessary to adjust the position of the photoelectric switch to the appropriate position. Additionally, poor vacuum cleaning can also affect the lifespan of the machine. There are many and complex reasons why the robot arm cannot operate normally. 7. Various situations may also occur due to abnormalities in the control system's single board computer. These are some common analyses and solutions for errors or accidents that occur during the use of CNC machine tools, hoping to be helpful to you! Specific applications still need to be judged and handled according to the actual situation.