The fixing method of laser cutting machine is as follows:
1. Choose the appropriate support method based on the equipment situation. Design features such as floor standing side braces or suspended diagonal braces to maintain stability. 2. Adjust the height and levelness using anchor bolts, and tighten all components to prevent vibration and detachment. 3. Ensure synchronization between the fiber laser and the scanning mirror system (through online debugging of control software). 4. Reinforce with screws according to actual needs. 5. Pay attention to the influence of the surrounding environment, such as magnetic field interference, and take corresponding measures to solve it. The installation position of the positioning fixture should be reasonable to ensure that the workpiece is not damaged during transportation; At the same time, operators must also follow safety regulations during processing to ensure the safety of both personnel and machines. In general, it is necessary to flexibly apply various fixed techniques and methods according to the actual situation in order to better complete the work. (Note: The above content is for reference only)