The production process of advertising engraving machine is as follows: 1. Prepare materials. Choose suitable wooden strips or lightweight keel structures to ensure sufficient strength and stability; Purchase printing cloth as the substrate and determine the size as needed; Prepare self tapping screws for connecting and fixing various components. 2. Install the machine. Assemble the selected wooden frame and securely install it on the spray painting. Pay attention to adjusting the horizontal and border verticality. 3. Setting up and running. Set the relevant parameters of the printer correctly to ensure that it can operate normally and align with the fixed pattern. At this point, a simple test can be conducted, and if there are no abnormalities, the next step can be taken. 4. Upper plate processing. Apply degreasing agent on the carved board, and accurately place the designed acrylic board or other material graphics in the corresponding positions for positioning, clamping, and cutting (depth can be controlled as needed). This step needs to be adjusted according to specific equipment and materials to achieve optimal results. 5. Clean up the site. Throughout the process, it is necessary to pay attention to safety issues and handle details, such as the sharpness of the blade, the use of the power switch, etc., all of which require special care. Regular maintenance of equipment is also crucial, as it can extend its lifespan and improve its efficiency. The specific steps may vary depending on the actual situation, please follow the product manual or operate under the guidance of personnel.
{1}
{2}
{3}
{4}